![](https://www.lohr.fr/uploads/2023/04/le-wagon-lohr-uic-3kme-gvnvration-1-scaled.jpg)
Wagon architecture
The MODALOHR wagon is suitable for existing railway infrastructures and standard road equipment. It has benefitted from significant improvements and innovations to enable it to travel on all the freight corridors in the European Network, due to the TEN (Trans-European Network) marking.
Wagon designed for the transport of standard semi-trailers:
A simple wagon
No engine or cylinders embarked on the wagon. Rotation of the pocket performed by ground equipment at the terminal. Thanks to this architecture, the maintenance cost is comparable to that of a conventional wagon and the MODALOHR system offers a high level of reliability that has been proven in intensive commercial operations since 2003.
![](https://www.lohr.fr/uploads/2024/08/un-wagon-simple-10-1024x583.jpg)
3-axle double wagon
![](https://www.lohr.fr/uploads/2024/08/ouverture-en-epi-des-poches-du-wagon-10-1024x583.jpg)
“At an angle” opening of wagon pockets
Types of wagon
The 3 types of LOHR UIC wagon :
![](http://www.lohr.fr/uploads/2023/02/uic-1.png)
![](http://www.lohr.fr/uploads/2023/02/uic-3.png)
![](http://www.lohr.fr/uploads/2023/02/uic-2.png)
Types of load
Possible user scenarios :
![](http://www.lohr.fr/uploads/2022/08/conteneur-1024x730.webp)
![](http://www.lohr.fr/uploads/2022/08/semi-remorque-citerne-1024x730.webp)
![](http://www.lohr.fr/uploads/2022/08/camion-porteur-1024x730.webp)
![](http://www.lohr.fr/uploads/2022/08/megatraillers-1024x730.webp)
![](http://www.lohr.fr/uploads/2022/08/tracteurs-routier-1024x730.webp)
![](https://www.lohr.fr//uploads/2023/05/camionette-1-1024x730.webp)
Technical characteristics
UIC I | UIC 2 | UIC 3 | |
---|---|---|---|
Wagon type | Extremity wagon | Intermediate wagon | Individual wagon |
Coupling type end 1 | Standard coupling with buffers | Coupling bar | Standard coupling with buffers |
Coupling type end 2 | Coupling bar | Coupling bar | Standard coupling with buffers |
Total length | 33,87 m | 32,94 m | 34,80 m |
Unloaded weight | 41,7 t | 40,7 t | 42,7 t |
Payload | 75,3 t | 76,3 t | 77,3 t |
Maximum load per semi-trailer | 38 t | 38 t | 38 t |
Minimum turning radius | 135 m | 135 m | 135 m |
Low gauge | UIC 505-1 – GIC2 (EN 15273-1) | UIC 505-1 – GIC2 (EN 15273-1) | UIC 505-1 – GIC2 (EN 15273-1) |
Maximum floor height compared with the rail | 225 mm | 225 mm | 225 mm |
Min-max height of the semi-trailer kingpin | 870 – 1170 mm | 870 – 1170 mm | 870 – 1170 mm |
![](https://www.lohr.fr/uploads/2023/02/tunel-en.png)
Gauge performance
- Gauge performance for the LOHR UIC wagon in France: with a loading floor at a maximum height of 225 mm in relation to the rail, the LOHR UIC wagon enables standard 4 m high semi-trailers to be transported on the AFM 423 (GB1 + 3 cm) gauge without exceeding the low UIC gauge
- Gauge performance for the LOHR UIC wagon in Switzerland: The LOHR UIC wagon is the only wagon enabling 4 m semi-trailers to be transported on the gauge of the current Gothard line
- Gauge performance for the LOHR UIC wagon in Europe: the LOHR UIC wagon enables standard 4 m high semi-trailers to be transported on P390-coded lines, standard 4.10 m high semi-trailers on P400-coded lines and standard 4.20 m high semi-trailers on P410-coded lines.
Compatibility with Combined Transport Terminals
LOHR UIC wagons have also been designed to allow as well vertical loading of clamp-on semi-trailers at a conventional Combined Transport terminal.
Reliability and low maintenance costs
Proven operation in severe weather conditions (heatwave, snow). Proven operation in difficult operating conditions, especially on the Alpine rail motorway. Each train makes 4 to 5 journeys a day on a difficult mountain line (steep gradients, low radius curves and counter-curves).
Discover more products
The MODALOHR system
The innovation comes from a simple idea: to put trucks on rails to save on long transit journeys and to overcome the obstacles placed on the road by men and nature.
The MODALOHR system terminals
The LOHR system incorporates simple transfer terminals of different lengths with ground systems to enable wagons to be opened "at an angle".
References and Projects
Since 2003 and the commercial deployment of several railroad lines highways, LOHR Railway System has proven its reliability and performance in real operating conditions and has become a reference system for road-rail modal shift.